29
For instructions on using the iCare PATIENT2 app, see iCare PATIENT2
Instruction Manuals (for Android and iOS).
12.1 Compliancy standards
The mobile device or computer connected to the iCare HOME2 tonometer
within the patient environment must be compliant with IEC 60601-1.
Equipment not complying to IEC 60601-1 must be kept outside the patient
environment and must comply to IEC 60950-1 or IEC 62368-1 or a similar
safety standard.
Any person who connects a mobile device or a computer to the iCare
HOME2 tonometer has formed a Medical Electrical System according to
the definition of IEC 60601-1 and is therefore responsible for the system to
comply with the requirements of IEC 60601-1. If in doubt, contact Icare USA.
For more information on the iCare software, go to
https://www.icare-world.com/us/.
The technical specification for the IT network is in chapter “17.3 IT network
specifications”.
12.2 Install the software
• Before the healthcare professional or the patient can start transferring
data from the tonometer to the iCare CLINIC cloud service, the
healthcare professional
needs to subscribe to iCare CLINIC at
https://icaremhome.com/
.
• To install iCare EXPORT on a computer, download the software from the
Help menu of iCare CLINIC or at https://www.icare-world.com/export/.
• To install iCare PATIENT2 on a mobile device, open Google Play (for
Android) or App Store (for iOS) on the mobile device and search for iCare
PATIENT2. Follow the installation instructions shown on the display.
For information on how to set up a private account to the iCare CLOUD, read
the Getting started guide in the tonometer’s carrying case.
The iCare HOME2 tonometer can be connected to either iCare CLINIC or
iCare CLOUD, but not both. Patients can store their measurement data to
a private account in iCare CLOUD, if their tonometer is not registered to a
healthcare professional’s iCare CLINIC account.
To Next Page
Loading...
