8
Note: The factory default setting is non-heat pump.
1. Place the Cool/Off/Heat switch in Off position.
2. Press both and buttons simultaneously. Differential setting displays.
3. Press button. Heat pump ON/OFF displays.
4. Press the or button to configure the heat pump setting.
5. When finished, move Cool/Off/Heat switch to Heat or Cool position to lock setting into memory.
CAUTION!
:
Do not use air conditioning when the outdoor temperature is below 50 degrees. This
can damage your air conditioning system and cause personal injuries.
1. Move the Fan Auto/On switch to the Auto position.
2. Move the Cool/Off/Heat switch to Cool or Heat, depending on the season.
OFF Indicator
Time
Room Temperature
Setting to Heat Pump or Non-Heat Pump
Starting the Thermostat
To Next Page
Loading...
