1
Electrical rating: • 24 VAC (18-30 VAC)
• 1 amp maximum per terminal
• 3 amp maximum total load
Temperature control ranges: 45°F to 90°F Accuracy: ± 1°F
System configurations: 1-stage heat, 1-stage cool, heat pump, gas, oil, electric
Terminations: C, RH, RC, W, Y, B, O, G
Package includes:
SimpleComfort
®
3001 programmable thermostat on base, labeled thermostat cover, wiring
labels, screws and wall anchors, and Installation, Operation and Application Guide.
Tools required for installation:
Drill with 3/16” bit, hammer, and screwdriver.
WARNING!
: Always turn off power at the main power supply before installing, cleaning, or removing
thermostat.
• This thermostat is for 24 VAC applications only; do not use on voltages over 30 VAC
• Do not short across terminals of gas valve or system control to test operation; this will damage your
thermostat and void your warranty
• All wiring must conform to local and national electrical and building codes
• Do not use air conditioning when the outdoor temperature is below 50 degrees; this can damage your
A/C system and cause personal injuries
• Use this thermostat only as described in this manual
Important Safety Information
Package Contents/Tools Required
Specications
To Next Page
Loading...
Need help?
General
