13
• Set time is displayed
8. Press the or button to change transition time.
9. Press the button to advance to the next screen.
• Heat temperature is displayed (50°F-90°F)
10. Press the or button to adjust heat set temperature.
11. Press the button to advance to the next screen.
• Cool temperature is displayed (45°F-85°F)
12. Press the or button to adjust cool set temperature.
13. Press the button to advance to the next screen.
Repeat steps 1-13 to program each day of the week individually or use the Simpleset
®
feature (see
Page 14) to program every day the same as Monday.
When programming is complete, slide the Cool/Off/Heat switch to Heat or Cool to exit the programming
mode.
Press Mode switch to enter and exit program operation. PROG displays on screen when following the
program schedule.
To Next Page
Loading...
