EasyManuals Logo

Icom A120BE User Manual

Icom A120BE
41 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #24 background imageLoading...
Page #24 background image
7
MENU MODE
7-5
FUNCTIONS
D CH SPACING
(May not be displayed, depending on the
transceiver’s presettings.)
Select “8.33 kHz,” “25 kHz,” or “8.33 kHz/25 kHz”
channel spacing.
D PRIORITY CH
(May not be displayed, depending on the
transceiver’s presettings.)
Select the Priority channel from the Memory channels
stored in the transceiver (p. 5-2).
• The channel set as the Priority channel is displayed.
“OFF” is displayed if no channel is set as the Priority
channel.
D NOISE LIMITING
Set the noise limiting function for receiving and
transmitting.
RX
• OFF: The Noise Limiting function is OFF.
ANL: The Automatic Noise Limiter (ANL) is ON.
• LOW: Reduces the received signal noise level to 1/2
of normal.
• MID: Reduces the received signal noise level to 1/3
of normal.
• HIGH: Reduces the received signal noise level to
1/10 of normal.
TX
• OFF: The Noise Limiting function is OFF.
• ON: The Noise Limiting function is ON.
D TIME OUT TIMER
(May not be displayed, depending on the
transceiver’s presettings.)
The Time-out Timer (TOT) limits continuous
transmissions on the channel, to prevent occupying
the channel for a long time.
• OFF*
1
: The Time-out Timer is disabled.
• 30 sec to 180 sec: Sets the Time-out Timer to
between 30 seconds and 180
seconds.
*
1
Except IC-A120E (AUS version).
D MIC KEY CUSTOMIZE
(May not be displayed, depending on the
transceiver’s presettings.)
You can customize the key assignment for the
optional HM-217 speaker micrOphOne (p. 9-3).
[P1]/[P2]
• VFO/MR MODE*
2
: Push to change the
operating mode.
• PRIORITY CH: Push to select the Priority
channel.
• DUALWATCH: Push to check the Priority
channel while receiving
another channel.
• SCAN START/PAUSE: Push to start a scan. Push
again to pause the scan
• SQL Push to adjust the squelch.
(p. 2-3)
• VOL Push to adjust the volume.
• LOCK Push to turn the Key Lock
function ON or OFF.
• --- No function is assigned.
*
2
For only USA, EXP and EUR versions.
[UP]/[DOWN]
• UP/DOWN: Push to select the channel.
• VOL UP/DOWN: Push to adjust the volume
level.
• SQL UP/DOWN: Push to adjust the squelch
level.
• --- No function is assigned.
D LOCK FUNCTION
Select an option for the Key Lock function.
All: Locks all keys.
• Microphone Key: Locks the keys on the
microphone.
• Panel Key: Locks the keys on the
transceiver.
SETTINGS group
CAUTION: In Canada, use of 8.33 kHz Channel
Spacing of this radio is strictly prohibited and shall
not be used.

Other manuals for Icom A120BE

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Icom A120BE and is the answer not in the manual?

Icom A120BE Specifications

General IconGeneral
BrandIcom
ModelA120BE
CategoryTransceiver
LanguageEnglish

Related product manuals