7
MENU MODE
7-8
SETTINGS group (Continued)
■ BLUETOOTH
The items in the “BLUETOOTH” menu are displayed
only when the UT-133A Bluetooth
®
unit is installed.
D
BLUETOOTH FUNC
Turn the Bluetooth
®
function ON or OFF.
•
OFF: The Bluetooth
®
function
is OFF.
•
ON: The Bluetooth
®
function
is ON.
D
AUTO CONNECT
(May not be displayed, depending on the
transceiver’s presettings.)
Select whether or not to automatically connect to the
last bonded Bluetooth
®
headset.
•
OFF: The user has to manually connects to the
Bluetooth
®
headset.
•
ON: The transceiver automatically connects to the
last bonded Bluetooth
®
headset
.
D
HEADSET SET
AF OUTPUT
Select the AF output option.
•
HEADSET: Outputs audio to the Bluetooth
®
headset.
•
HEADSET & SPEAKER: Outputs audio to both the
Bluetooth
®
headset and the
internal speaker.
BT HEADSET USE
(May not be displayed, depending on the
transceiver’s presettings.)
Select which device’s audio and PTT to use when a
Bluetooth
®
headset and the microphone are connected
to the transceiver.
•
NORMAL: Transmits the audio from the
device whose [PTT] is pushed.
•
MIC: Transmits the audio from the
Bluetooth
®
headset.
•
PTT (MAIN MIC): The transmission is made
by pushing [PTT] on the
Bluetooth
®
headset.
Transmits the audio from the
hand microphone.
•
PTT (MAIN HS MIC): The transmission is made
by pushing [PTT] on the
Bluetooth
®
headset.
Transmits the audio from the
headset connected to the
transceiver with the optional
OPC-871A headset adapter.
ICOM HEADSET
(May not be displayed, depending on the
transceiver’s presettings.)
POWER SAVE:
Select whether or not to use the Battery Saving mode
with VS-3 Bluetooth
®
headset.
•
OFF: The Power Save mode is OFF.
•
ON: The Power Save mode is temporalily activated
if the connected VS-3 Bluetooth
®
headset is
not used for 120 seconds.
ONE-TOUCH PTT:
This function enables you to communicate with a
single push of the VS-3 Bluetooth
®
headset's [PTT].
Select whether or not to enable the One-Touch PTT
function.
•
OFF: The function is OFF.
•
ON: The function is ON.
PTT BEEP:
Set the beep sound when pushing [PTT] on the
optional VS-3 Bluetooth
®
headset.
•
OFF: No beep sounds when you push VS-3's [PTT].
•
ON: Beep sounds when you push VS-3's [PTT].
To Next Page
Loading...
Need help?
General
