18
BASIC MANUAL
6
SET MODE
Set mode description
You can use the Set mode to set infrequently changed values or function settings.
The transceiver has 2 set modes, the Quick Set mode and the Initial Set mode.
D Quick Set mode operation
1. While the transceiver is ON, hold down [SET] for
1 second.
• Enters the Quick Set mode, and a setting item is
displayed.
2.
3.
the selected item.
4. Repeat steps 2 and 3 to set other items.
5. Push [SET] to exit the Quick Set mode.
D Initial Set mode operation
1. Turn OFF the transceiver.
2. While holding down [SET], push [PWR] to turn ON
the transceiver.
• Enters the Initial Set mode and a setting item is
displayed.
3.
4.
the selected item.
5. Repeat steps 2 and 3 to set other items.
6. Hold down [PWR] for 1 second to turn OFF the
transceiver.
7. Push [PWR] to turn ON the transceiver with the
revised settings.
[SET]
[SET]
[PWR]
To Next Page
Loading...
