31
12
SPECIFICATIONS
New2001
D GENERAL
• Frequency coverage : Transmit 156.025–157.425 MHz
Receive 156.050–163.275 MHz
• Mode : FM (16K0G3E)
• Channel spacing : 25 kHz
• Power supply requirement : BP-223, BP-224 and BP-252 only
• Current drain (at 7.5 V DC) : TX High (5 W) 1.5 A typical.
Max. audio 200 mA typical
Power save 20 mA typical
• Frequency stability : ±10 ppm (–20°C to +60°C)
• Useable temperature range : –20°C to +60°C; –4°F to +140°F
• Dimensions : 61 (W) × 135(H) × 41(D) mm
(Projections not included) 2
13
⁄32(W) × 5
5
⁄16(H) × 1
5
⁄8(D) inch
• Weight (with BP-224) : Approx. 360 g (12.7 oz)
D TRANSMITTER
• Output power (at 7.5 V DC) : 5 W (Hi) and 1 W (Low)
• Modulation system : Variable reactance frequency
• Max. frequency deviation : ±5 kHz
• Adjacent channel power : 70 dB
• Spurious emissions : Less than –68 dBc
D RECEIVER
• Receive system : Double-conversion
superheterodyne
• Sensitivity (12 dB SINAD) : 0.25 µV typical
• Squelch sensitivity : Less than 0.35 µV (at threshold)
• Intermodulation rejection ratio : 70 dB typical
• Spurious response rejection ratio : 70 dB typical
• Adjacent channel selectivity : 70 dB typical
• Audio output power : 0.35 W typical at 10% distortion
with an 8 Ω load
All stated specifications are subject to change without notice
or obligation�
11
12
To Next Page
Loading...
