21
6
DSC OPERATION
■
Setting the distress information
The nature of the distress call should be included in the dis-
tress call.
q Push [DSC/ENT] to select the DSC menu.
w Rotate the channel selector to select “DTRS set” and push
[DSC/ENT].
e Rotate the channel selector to select the nature of the dis-
tress, then push [DSC/ENT].
•‘Undesign (Undesigned),’ ‘Explosion,’ ‘Flooding,’ ‘Collision,’
‘Grounding,’ ‘Capsizing,’ ‘Sinking,’ ‘Adrift (Disable adrift),’ ‘Aban-
doning (Abandoning ship),’ ‘Piracy (Piracy attack),’ ‘MOB (Man
overboard)’ and ‘EPIRB (EPIRB emission)’ are available.
r The position information appears. Set the current position,
then push [DSC/ENT].
•Rotate the channel selector to select the character.
•Push [CH/WX] to advance the cursor.
•Push [SCAN] to move the cursor backward.
•Push [HI/LO] to clear the position data.
t The time information appears. Set the current time, then
push [DSC/ENT].
•Rotate the channel selector to select the numeral.
•Push [CH/WX] to advance the cursor.
•Push [SCAN] to move the cursor backward.
•Push [HI/LO] to clear the time data.
y Push [DISTRESS] for 5 sec. to transmit the distress call.
•Push [DSC/ENT] to exit the condition.
•The selected nature of the distress is stored for 10 minutes.
To Next Page
Loading...
