Icom IC-M502 - DSC Set Mode

26
6
DSC OPERATION
■ DSC set mode
Offset time
This item sets the offset time from the UTC (Universal Time
Coordinated) time.
q Push [DSC/ENT] to select the DSC menu.
w Rotate the channel selector to select “Set-up” and push
[DSC/ENT].
e Rotate the channel selector to select ‘Offset time,’ then
push [DSC/ENT].
r Set the offset time from the UTC (Universal Time Coordi-
nated) time, then push [DSC/ENT].
•Rotate the channel selector to select the number, ‘+’ or ‘–.’
•Push [CH/WX] to advance the cursor.
•Push [SCAN] to move the cursor backward.
•Push [HI/LO] to cancel and exit the condition.
t Push [DSC/ENT] to program and to exit the condition.
Offsettime
00:00
Offsettime
-12:00
No offset time (default) –12 hours
Set-up
DeleteID
AddID
˘Offsettime
Selitem
RCVcalls
DTRSset
˘Set-up