Icom IC-M502 - Receive Messages

28
6
DSC OPERATION
■ Receive messages
The transceiver automatically stores up to 20 distress mes-
sages and 20 other messages. The messages can be used
as an assistance to the logbook.
q Push [DSC/ENT] to select the DSC menu.
w Rotate the channel selector to select “RCV calls” and push
[DSC/ENT].
•“RCV calls” does not appear until a distress call is received.
e Rotate the channel selector to select distress messages or
other messages, then push [DSC/ENT].
r Rotate the channel selector to select the desired message,
then push [DSC/ENT].
t Rotate the channel selector to scroll the message.
•The stored message has several information and depends on the
distress call types.
y Push [DSC/ENT] to exit the condition or push [HI/LO] to
clear the displayed messages.
Toclear
thisdata
No[DSC/ENT]
Yes[H/L]
SelDTRSMSG
Icom2
˘Smith
John
Distress
<Smith
Explosion
UTC:12:34
LAT:12°34'N
LON:123°45'W
Toclear
thisdata
No[DSC/ENT]
Yes[H/L]
SelMassage
Individual
Individual
˘Allships
Allships
<Bill
Safety
F3ESimplex
CH13
Toclear
thisdata
No[DSC/ENT]
Yes[H/L]
SelMessage
Other
˘Distress
Selitem
˘RCVcalls
DTRSset
Set-up