Icom IC-M502 - 12 Specifications and Options; Specifications

42
12
SPECIFICATIONS AND OPTIONS
■ Specifications
General
•Frequency coverage :
Transmit 156.025–157.425 MHz
Receive 156.050–163.275 MHz
•Mode : FM (16K0G3E)
DSC (16K0G2B)
•Channel spacing : 25 kHz
•Current drain (at 13.8 V) : TX high 6.0 A max.
Max. audio 1.2 A max.
•Power supply requirement: 13.8 V DC ±15%
•Frequency stability : ±10 ppm
(–20°C to +60°C; –4°F to
+140°F)
•Dimensions : 165(W)×110(H)×109.4(D) mm
(Projection not included) 6
1
⁄2(W)×4
11
⁄32(H)×4
5
⁄16(D) in
•Weight : 1130 g; 2 lb 8 oz
Transmitter
•Output power :25 W and 1 W
•Modulation system : Variable reactance phase
modulation
•Max. frequency deviation : ±5.0 kHz
•Spurious emissions : –70 dB
Receiver
•Receive system : Double conversion
superheterodyne
•Sensitivity (12 dB SINAD) : Less than 0.25 µV (typical)
•Squelch sensitivity : Less than 0.3 µV
•
Intermodulation rejection ratio : More than 80 dB (typical)
•Spurious response : More than 80 dB (typical)
rejection ratio
•
Adjacent channel selectivity : More than 80 dB (typical)
•Audio output power : More than 3.5 W at 10% distor-
tion with a 4 Ω load
All stated specifications are subject to change without
notice or obligation.