Icom IC-M502 - Page 31

27
6
DSC OPERATION
MMSI code check
The 9-digit MMSI (DSC self ID) code can be checked in set
mode.
q Push [DSC/ENT] to select the DSC menu.
w Rotate the channel selector to select “Set-up” and push
[DSC/ENT].
e Rotate the channel selector to select ‘MMSI check,’ then
push [DSC/ENT].
r Check the 9-digit MMSI (DSC self ID) code.
t Push [DSC/ENT] to exit the condition.
MMSIcheck
123456789
Set-up
Offsettime
DeleteID
˘MMSIcheck
Selitem
RCVcalls
DTRSset
˘Set-up