Icom IC-M506EURO - Page 16

Channel group selection D
There are preprogrammed international channels for the IC-
M506EURO.
Except for the Europe versions, you can select a channel
group suitable for your operating area, as described below.
q Push [MENU].
w Rotate dial or push
[Ω]/[≈] to select the “RADIO SET”
icon and then push the softkey below the icon.
 •RADIOSETTINGSmenuisdisplayed.
e Rotate dial or push [∫]/[√] to select “CHAN Group,” and
then push [ENT].
r Rotate dial or push [∫]/[√] to select the desired channel
group, and then push [ENT].
t Push [EXIT] to exit the Menu screen.
y Rotate dial or push [∫](CH)/[√](CH) to select a channel.
 •Pushing[Y]/[Z] on the microphone selects only Favorite chan-
nels.
 •YoucanturnOFFtheFAVonMICsetting(p.93).Afterthat,you
can select all channels by the microphone.
 •The“DUP”iconappearswhenaduplexchannelisselected.
 •“A”appearswhenasimplexchannelisselected.
10
4
BASIC OPERATION
New2001
When the USA channel
group is selected.
Channel group icon appears