Icom IC-M506EURO

New2001
85
11
MENU SCREEN OPERATION
New2001
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
Menu screen items ■
The Menu screen contains the following items.
DSC D
Item Ref. Item Ref.
•IndividualCall p. 27 •
Transmitted Call Log p. 60
•IndividualACK*
1
p. 30 • Position Reply*
1
p. 40
•GroupCall p. 32 •PollingReply*
1
p. 44
•AllShipsCall p. 34 •TestCall p. 36
•DistressCall p. 22 •TestACK*
1
p. 38
•ReceivedCallLog p. 58
D CONFIG (Configuration)
Item Ref. Item Ref.
•Backlight p. 86 •UTCOffset p. 88
•DisplayContrast p. 86 •HornFrequency p. 88
•KeyBeep p. 86 •InactivityTimer p. 88
•KeyAssignment p. 87 •UnitID p. 89
•KeyMovement p. 87 •COMMANDMICSP*
3
p. 89
*
1
Appears only after receiving a corresponding call.
*
2
Appears only when no GPS information is received.
*
3
Appears only when the optional HM-195 is connected.
*
4
Appears only when a GPS receiver compatible with NMEA 0183
(ver. 2.0 or later) or NMEA 2000 is connected.
*
5
Appears only when the voice scrambler unit is installed.
*
6
Appears only for the Dutch and German version transceivers.
D MMSI/GPS
The transceiver shows the programmed MMSI and ATIS*
6
codes, GPS information*
4
, and installed option unit.
If the code is not programmed, “NO DSC MMSI” is displayed.
DSC SET D
Item Ref. Item Ref.
•PositionInput*
2
p. 21 •CH16Switch p. 62
•IndividualID p. 18 •DSCDataOutput p. 63
•GroupID p. 19 •AlarmStatus p. 63
•IndividualACK p. 61 •CH70SQLLevel p. 64
•PositionACK p. 61 •DSCLoopTest p. 64
•TestACK p. 61
D RADIO SET
Item Ref. Item Ref.
•ScanType p. 90 •VoiceScrambler*
5
p. 91
•ScanTimer p. 90 •NoiseCancel p. 92
•Dual/Tri-Watch p. 90 •VoiceRecord p. 93
•CHANGroup p. 90 •FAVonMIC p. 93
•CALLCHAN p. 91