Icom IC-M506EURO User Manual

46
7
DSC OPERATION
New2001 New2001
Receiving DSC calls ■
Receiving a Distress Call D
When a Distress Call is received:
The emergency alarm sounds for 2 minutes. ➥
“ RCVD DISTRESS” appears and the backlight blinks. ➥
q Push [ALARM OFF] to stop the alarm and the blinking
backlight.
 •Evenifyoudonotpush[ALARMOFF],thealarmstopsafter2
minutes, and then the screen in step w is displayed.
w Push a softkey to select your desired action.
[IGN]
➥Push to return to the normal operating mode.
  •ThetransceiverexitstheDSCmode.
  •Bypushing[PTT],thetransceiveralsoexitstheDSCmode.
  •The“ ” icon continues to blink and the Call is stored in the
Received Call Log.
[INFO]
➥Push to display the Received call information. (p. 58)
[ACPT]
Push to accept the call. ➥
And then, push [CH 16] to switch the operating channel
to Channel 16, and then monitor it, as a coast station
may require assistance.
  •Evenifyouhaven’tpushed[CH16]within10seconds,the
operating channel automatically switches to Channel 16. (p.
69)
Push

Icom IC-M506EURO Specifications

General

Brand	Icom
Model	IC-M506EURO
Category	Transceiver
Language	English