Icom IC-M506EURO

New2001
3
2
PANEL DESCRIPTION
New2001
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
3
i CHANNEL 16/CALL CHANNEL KEY [16/C]
➥ Push to select Channel 16. (p. 9)
➥ Hold down for 1 second to select the Call channel. (p. 9 )
  •The“CALL”iconappearswhentheCallchannelisselected.
o SQUELCH DIAL
Rotate to adjust the squelch level.
!0 SOFTKEYS
Desired functions as described below can be assigned in
the Menu screen. (p. 87)
Scan [
]* (p. 16)
Push to start or stop a Normal or Priority scan.
*This key does not appear for Dutch version transceivers.
Dualwatch/Tri-watch [ ] (p. 17)
Push once to start and stop a Dualwatch or Tri-watch.
AIS [
]* (p. 73)
Push to display the AIS plotter on the left side of the display.
*Some versions of IC-M506EURO do not have an AIS receiver.
Channel [ ] (pp. 9, 11)
Push to select a regular channel.
High/Low [
] (p. 11)
Push to set the power to high or low.
 •Somechannelsaresettoonlylowpower.
Voice Scrambler [ ]* (p. 71)
Push to turn the Voice Scrambler ON or OFF.
•The“SBL”iconappearswhenthevoicescramblerisON.
*This key appears only when the voice scrambler unit is installed.
Voice Recorder [ ] (p. 71)
Push to playback recorded voice.
RX Hailer [ ] (p. 61)
Push to turn the RX Hailer mode ON or OFF.
LO/DX [
]*
Push to turn the Attenuator function ON or OFF.
 •The“LOC”iconappearswhentheAttenuatorfunctionisON.
*This key appears only for Australian version transceivers.
Favorite channel [ ] (p. 16)
Push to set or clear the displayed channel as a Favorite ➥
(Tag) channel.
➥ Hold down for 3 seconds to clear or set all Favorite
channels in the selected channel group.
Name [
] (p. 12)
Push to enter the channel name programming mode.
Backlight [
] (p. 14)
Push to enter the LCD and key backlight brightness ad-
justment mode.
Log [
] (p. 58)
Push to enter “RCVD CALL LOG” in the DSC CALLS menu.
!1 VOLUME DIAL
Rotate to adjust the volume level.