Icom IC-M602 - Accessory Mechanical Parts

25
6
DSC OPERATION
When a GPS receiver (NMEA0183 ver. 2.0 or 3.01) is con-
nected,
next steps r, t ( Current position/time program-
ming) do not appear. Go to step y.
r The position information appears. Set the current position,
then push [ENT].
• Edit the digit of your position data directly with the keypad.
•Push [6• ] to edit N; North latitude or [7• ] to edit
S; South latitude.
•Push [3• ] to edit E; East longitude or [9• ] to edit
W; West longitude.
• Rotate [CHANNEL] to move the cursor backward or forward.
• Push [CE] to clear the position data.
t The time information appears. Set the current UTC time,
push [ENT].
• Edit the digit of the current UTC time directly with the keypad.
• Push [CLR] to abandon the setting and exit the condition to se-
lecting the nature menu.
• Rotate [CHANNEL] to move the cursor backward or forward.
• Push [CE] to clear the time.
y Push [DISTRESS] for 5 sec. to transmit the distress call.
• The selected nature of the distress is stored for 10 minutes.
Input UTC time
˘__:__˘˘˘˘˘˘˘˘˘˘˘˘Null
--DSC Menu--
<CE˘Null Data>
<CLR˘Exit / ENT˘OK>
Input Position
Latitude
Longitude
--DSC Menu--
<CE˘Null Data>
___°__.___W˘˘˘˘˘˘˘˘Null
˘_°__.___N˘˘˘˘˘˘˘˘Null
<CLR˘Exit / ENT˘OK>
WXYDEF
PRSMNO
Select Nature
˘Undesignated
˘Flooding
--DSC Menu--
˘
˘Collision
˘Grounding
˘Abandoning
˘Capsizing
˘Sinking
˘Adrift
<CLR˘Exit / ENT˘OK>
˘Piracy
˘MOB
˘-----
˘Explosion
6