EasyManua.ls Logo

Icom IC-M602 - Semiconductor Information; Transistors and FETs; Diodes

Icom IC-M602
86 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
26
6
DSC OPERATION
u After transmitting the call, the transceiver waits for an ac-
knowledgment call on Ch 70.
The distress call is automatically transmitted every 3.5 to 4.5
minutes.
i After 2 sec., the transceiver is set to Channel 16 automat-
ically.
o After receiving the acknowledgment, reply using the mi-
crophone.
A distress alert contains (default);
Kind of distress : Undesignated distress
Position data : GPS or manual input position data held for
23.5 hrs.
The distress call is repeated every 3.5–4.5 min., until re-
ceiving an ‘acknowledgement.’
Push [DISTRESS] to transmit a renewed distress call, if
required.
Push [CLR] to cancel the ‘Call repeat’ mode.
??” may blink instead of position and time indications
when the GPS data is invalid, or has not been manually
updated after 4 hours.
BUSY-25W---INT---CALL
LOCAL--DUP
SCRAM--TAG
ReceivedCAN
DistressACK
<Osaka Bay
>Chuck3
-<CLR˘Exit>--CALLING
BUSY-25W---INT---CALL
LOCAL--DUP
SCRAM--TAG
NORMAL-SCAN
Wait ACK
-34"34.506N
<CLR˘
Cancel ACK---CALLING
Distress Call
TX Complete
Now Wating for ACK
<CLR˘Cancel ACK>

Table of Contents

Other manuals for Icom IC-M602

Related product manuals