Icom IC-M602 - Page 41

33
6
DSC OPERATION
DD
Transmitting Position report call
Transmit a position report call when you want to announce
your own position to a specific ship and to get an answer.
q Push [MENU] to enter the DSC menu.
w Rotate [CHANNEL] to select “Position Report,”
push [ENT].
e Rotate [CHANNEL] to select the desired pre-programmed
individual address or “Manual Input,” push [ENT].
• The ID code for the individual call can be set in advance. (p. 19)
• When “Manual Input” is selected, set the 9-digit ID code for
the individual you wish to call with the keypad.
When a GPS receiver (NMEA0183 ver. 2.0 or 3.01) is con-
nected,
next steps r, t ( Current position/time program-
ming) do not appear. Go to step y.
r The position information appears. Set the current position,
then push [ENT].
• Edit the digit of your position data directly with the keypad.
•Push [6• ] to edit N; North latitude or [7• ] to edit
S; South latitude.
•Push [3• ] to edit E; East longitude or [9• ] to edit
W; West longitude.
• Rotate [CHANNEL] to move the cursor backward or forward.
• Push [CE] to clear the position data.
Input Position
Latitude
Longitude
--DSC Menu--
<CE˘Null Data>
___°__.___W˘˘˘˘˘˘˘˘Null
˘_°__.___N˘˘˘˘˘˘˘˘Null
<CLR˘Exit / ENT˘OK>
WXYDEF
PRSMNO
Select Address
<CLR˘Exit / ENT˘OK>
˘Manual Input
˘Margaret
--DSC Menu--
˘Ricky
˘John
Select item
˘Polling Request
˘Individual Call
˘All Ships Call
--DSC Menu--
˘Position Report
˘Position Request
˘Group Call
6