Icom IC-M602 - Accessory Board Layouts

34
6
DSC OPERATION
t The time information appears. Set the current UTC time,
push [ENT].
• Edit the digit of the current UTC time directly with the keypad.
• Rotate [CHANNEL] to move the cursor backward or forward.
• Push [CE] to clear the time.
y Push [ENT] to transmit the position report call.
u After the position report call has been transmitted, the fol-
lowing indication is displayed.
i Push [CLR] to exit the previous indication.
• Even if [CLR] hasn’t been pushed, the display automatically re-
turns to the original indication after 2 sec. of inactivity.
Position Report
TX Complete
--DSC Menu--
˘<CLR˘Exit>
Now Waiting for ACK
Position Report Ready
<CLR˘Exit / ENT˘OK>
--DSC Menu--
Input UTC time
˘__:__˘˘˘˘˘˘˘˘˘˘˘˘Null
--DSC Menu--
<CE˘Null Data>
<CLR˘Exit / ENT˘OK>