Icom IC-M88

■ Adjusting the squelch level
The IC-M88 has a squelch circuitry. In order to receive the sig-
nals properly, as well as for the efficient scan, the squelch must
be adjusted to the proper level.
q Push [SQL], then adjust the squelch level with [Y]/[Z].
- “SL” indicator is displayed.
- There are 11 squelch levels. OP is completely open, 10 is the
tightest squelch level.
- When no key is pushed for 5 seconds, the transceiver returns to
the normal condition.
w Push [SQL] again to return to the normal condition.
■ Automatic backlight
This function is convenient for nighttime operation. The auto-
matic backlight can be activated in the Set mode. (p. 19)
➥ Push any key except [PTT] to turn ON the backlight.
• The backlight is automatically turned OFF after 5 seconds of in-
activity.
■ Lock function
This function electronically locks all keys (except for [PTT],
[SQL] and [H/L•
LOCK]) to prevent accidental channel
changes and function access.
• Hold down [H/L•LOCK] for 1 second to turn the lock function ON
and OFF.
Displayed when the
Lock function is ON.
11
4
BASIC OPERATION
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16