■ Set mode programming
The Set mode is used to change the condition of 13 trans-
ceiver functions: Beep Tone function, Weather Alert function,
Priority Scan function, Scan Resume timer, Auto Scan func-
tion, Dual/Tri-watch function, Monitor Key Action, Automatic
Backlighting, LCD Contrast selection, Auto Power Save func-
tion, Self Check function, and Battery Voltage indicator.
D Set mode operation
q Turn OFF the power.
w While holding down [SQL], turn ON the power to enter the
Set mode.
• “bp” is displayed.
e Push [SQL] to select the desired item, if necessary.
r Push
[Y] or [Z] to select the desired item option.
t To exit Set mode, push [16•
9].
Push [SQL]
Starting item
* Available for the I/S version only
• Beep Tone
• Priority Scan • Scan Resume timer
• Auto Scan
• Dual/Tri-watch• LCD Contrast• Auto Power Save• Self Check
• Weather Alert
• Battery Voltage
• Automatic
Backlighting
• Monitor Key
Action
• SET MODE CONTENTS The displays show the default settings, and the item initial is displayed in the dotted circle.
8
SET MODE
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
To Next Page
Loading...
