Icom IC-M88

9
BATTERY CHARGING
■ Optional battery chargers
D AD-100 installation
The AD-100 charger adapter must be installed into the BC-
119N or BC-121N before battery charging.
Connect the AD-100 charger adapter and the BC-119N/BC-
121N as shown below, then install the AD-100 into the holder
space of the BC-119N or BC-121N with the supplied screws.
Screws supplied
with the charger
adapter
Connectors
Sockets
AD-100
This illustration is
described with the
BC-119N.
D Rapid charging with the BC-119N+AD-100
The optional BC-119N provides rapid charging of battery
packs.
The following items are additionally required.
• AD-100 charger adapter
• A power adapter (may be supplied with BC-119N depend-
ing on version) or the DC power cable (OPC-515L/CP-23L).
Po
wer adapter
(A
different type, or no
power adapter is supplied,
depending on the version.)
AD-100 charger
adapter is installed
in the BC-119N.
About OPC-515L
White line: Black line
:
*
Optional OPC-515L*
(for power source)
or CP-23L (for 12 V
cigarette lighter socket)
can be used instead of
the power adapter.
Battery pack
Transceiver
Tu rn OFF the power
26