1
2
ACCESSORIES
Jack cover D
To attach the jack cover:
q Place the jack cover over the speaker-microphone
jack.
w Insert and tighten the screws.
CAUTION: The transceiver meets IP67 requirements
for dust-tight and waterproof protection, only when
the jack cover or the optional HM-168LWP s p e a k e r
m i c r O p h O n e is attached.
To detach the jack cover:
z Unscrew the screws using a Phillips screwdriver.
x Detach the jack cover to connect a speaker-micro-
phone or a headset.
Accessory attachments (Continued)
To Next Page
Loading...
