Icom ID-RP2010V - Receiver and Connector Information; Receiver Specifications; Connector Functions and LED Indicators

4-9
■ UTILITY FOR ID-RP3 SETTINGS (COMMON)
The settings shown below are the minimum required to use
the Digital Repeater function. See the Utility for ID-RP3
HELP for more details for other setting items.
D RX Frequency/TX Frequency

L 
×” is displayed when frequencies are set to default.
L 
repeater.
D Mode

L 
ID-RP1200VD.
D Call Sign
Enter the repeater call sign assigned to it.
L An Emergency Stop command provided through the LAN
is usable by setting the call sign.
D Squelch Level
Enter the squelch level at which the squelch just opens, and
the repeater starts operating.
D Selecting the output power
Select the output power using the [H/L] switch on the

L 