Icom ID-RP2010V - Antenna and Regulatory Information; Antenna Connector Details; Regulatory Compliance and Disposal; Optional LTE Unit

4-10
■ UTILITY FOR ID-RP3 SETTINGS (GATEWAY SETTINGS)
L 
Settings shown below are required if operating the repeater as a Gateway.
D Using a Gateway server
1) 1).
L 
2) Enter the IP address of the port to the repeater (2).
L Enter the IP address assigned by your environment.
3) Enter the UDP port number (3).
L 
1
2
3
TIP: Using the Gateway function with multiple repeaters
Only one repeater is settable as a Gateway.
L 
×” is displayed if multiple repeaters are set as Gateways.
If the ID-RP1200VD in DD mode is included, set it as
a Gateway.
L ×” is displayed if another repeater is set as a Gateway