4-11
■ UTILITY FOR ID-RP3 SETTINGS (NETWORK SETTINGS)
D Using a Gateway server
Using the DHCP Client function:
Automatically gets the repeater IP address and Subnet
z
Manually entering the repeater IP address and
Subnet mask:
1) 1).
2)
(2 3).
L If connecting to a router that has the DHCP Server
function enabled, set the IP address that is outside
the range of the automatically assigned one.
L
repeater, enter the same IP address as the target
3) 4).
1
2
3
4
D Time Settings
L
L Use the default NTP server address if possible.
To Next Page
Loading...
