Icom ID-RP2010V - SD Card Handling; SD Card Insertion; SD Card Removal

11
4
SD CARD
■ About the SD card’s folder contents
Firmware folder:


L 
Setting folder:
Saves the repeater’s setting data in the “icf” format.
L 
“SetYYYYMMDD_XX.icf.”
L When writing the programmed data to the repeater, save

Speech folder:
Saves the voice data used for reading out callsign in
the “wav” format.
L 
L The voice data cannot be backed up from the repeater to
an SD card.
ID-RP3
Setting
Speech
Firmware
When inserting an SD card, folders will be created as
shown below. You can browse or edit the contents on
your PC.