ICON Cube - Cube Mini

Cube Mini
Specifications (Measured at 48KHz Sample Rate)(Continues)
Inst1/2 & Mic2 Inputs:
Line Outputs 1/2 (Stereo, Unbanced):
Headphone Outputs: 1 & 2 (at Maximum Volume; Into 100 Ohm load):
Frequency Response: ..............................22Hz to 22kHz (+/-0.1dB)
Dynamic Range: ......................................100dB, A-weighted
Signal-to-Noise Ratio: .............................-100dB, A-weighted
THD+N: ...................................................<0.0061% (-90dB)
Crosstalk: ................................................-100dB @ 1kHz
Input Impedance: ...................................Inst in: 500K Ohms, typical;
Mic in: 1.8K Ohms, typical
Total Gain Range: ....................................+45dB
Frequency Response: ..............................22Hz 22kHz (+/-0.1dB)
Dynamic Range: ......................................102dB, A-weighted
Signal-to-Noise Ratio: .............................-102dB, A-weighted
THD+N: ....................................................<0.003% (-90 dB)
Crosstalk: .................................................-100dB @ 1kHz
Nominal Output Level: ............................Unbalanced: +4dBV, typical;
Maximum Output Level: .........................+11dBV, typical;
Output Impedance: .................................150 Ohm
Load Impedance: ....................................600 Ohm minimum
Frequency Response: ..............................22Hz to 22kHz (+/-1dB)
Power into Ohms: ...................................90 mW into 100 Ohms
THD+N: ....................................................<0.06% (-66dB)
Signal-to-Noise Ratio: .............................-90dB, A-weighted
Max Output Level into 100 Ohms: ..........+2.0dBV, typical
Output Impedance: .................................75 Ohm
Load Impedance: .....................................32 to 600 Ohms