TUNNEL MASTER JR MANUAL
Welcome 1
Welcome
Welcome, and thank you for purchasing your new Tunnel Master Jr. Car Wash Controller
from Innovative Control Systems, Inc.
As an ICS customer you benefit from a thoroughly researched car wash controller system.
This manual, “ICS Car Wash Controller System” has many features, which will enable you,
the operator, to have an active part in the control and operation of your car wash facility.
Controller Features:
• 24 programmable, fused outputs, upgradeable to 48, each with two independent circuits
for 24vac and 110vac
• Programmable relay flashing feature
• Exclusive, patented anti theft feature to prevent unauthorized processing of car washes
• Input for Pulse, Gate, Tire, Roller Locator, Entrance Management and Panic circuits
• Auto pulse feature allows pulse simulation in the event of pulse switch failure
• Auto Gate feature allows gate switch simulation in the event of gate switch failure
• Exterior indicators for easy troubleshooting
• 16 programmable service buttons on the entry keypad, upgradeable to 32
• Automated wet down feature for easy startup
• Optional report and/or receipt printers
ICS developed this manual in order to:
• Provide a comprehensive, easy-to-use system reference guide.
• Enable operators and their employees to obtain the maximum value from the system.
• Furnish operators with a tool for training their employees on the OEM Car Wash
Controller.
By reading the information and performing the procedures in this manual you should
be able to:
• Install your Tunnel Master Jr. Controller
• Configure your wash settings and features
• Process vehicles through your wash
• View car counts
• View historical information
• Track sales
• Print reports
• Troubleshoot problems if they occur
Many of the features you will find in the ICS Controller system were integrated at the
request of current car wash operators. We welcome your feedback and want to assure you
that ICS will always remain the best in the industry in car wash controller and management
systems.
Information in this manual is subject to change without notice. Companies, names and data used in examples within the manual are
fictitious unless otherwise noted. No part of this manual may be reproduced or transmitted in any form or by any means, electronic or
mechanical, for any purpose without the express written permission of Innovative Control Systems, Inc.
To Next Page
Need help?
General
