ICT DIN Series User Manual

18 Innovative Circuit Technology Ltd.
SNMPv3 Settings:
User Name: Enter the user name for SNMPv3 access.
Authentication Protocol: Select the SNMPv3 authentication protocol
(None, MD5, or SHA).
Authentication Password: If an authentication protocol is selected,
enter the authentication password.
Privacy Protocol: Select the SNMPv3 privacy protocol (None, or AES).
Privacy Password: If a privacy protocol is selected, enter the privacy
password.
SNMP Trap Settings:
Trap Version: Sets the SNMP version (v1 or v3) for SNMP traps sent
from the PDU. The appropriate settings for the selected SNMP version
will need to be configured.
Trap Community: Assign the community string/password that will be
sent with all SNMPv1 traps. Some trap receivers are able to filter based
on Trap Community.
Trap User Name: Assign the user name for SNMPv3 traps.
Authentication Protocol: Select the authentication protocol for SNMPv3
traps (None, MD5, or SHA).
Authentication Password: If an authentication protocol is selected,
enter the authentication password for SNMPv3 traps.
Privacy Protocol: Select the privacy protocol for SNMPv3 traps (None, or
AES).
Privacy Password: If a privacy protocol is selected, enter the privacy
password for SNMPv3 traps.
Trap IP Addresses: Enter the IP addresses for up to two devices that will
receive SNMP traps from the PDU.

ICT DIN Series Specifications

General

Brand	ICT
Model	DIN Series
Category	Power Supply
Language	English