IDE e1.01 - Takings Total Counter

To browse and/or delete electric energy counter contents:
1. When the controller is in the programming mode (see page 5), in the
Statistics submenu (see page 12), select electric energy counter with
buttons. Electric energy counter
2. To delete electric energy counter contents, press button.
3. To delete electric energy counter contents, press button again.
To stop deleting counter’s contents, press button.
To return to the Statistics submenu, press button. To leave the
programming mode, press button or wait 60 seconds.
Takings total counter
Takings total counter (deletable) shows the expected income since
the last deleting.
Counter’s capacity: <00000 ; 99999 >
Default setting: 00000
To browse and/or delete takings total counter contents:
1. When the controller is in the programming mode (see page 5), in the
Statistics submenu (see page 12), select takings total counter with
buttons. Takings total counter
2. To delete takings total counter contents, press button.
3. To delete takings total counter contents, press button again. To
stop deleting counter’s contents, press button.
To return to the Statistics submenu, press button. To leave the
programming mode, press button or wait 60 seconds.
and
and
symbol and its contents,
expressed in kWh, is displayed alternately.
The changes of the counter’s contents are saved
automatically in the long term memory at the beginning
of the session.
Takings total counter contents are calculated on the
basis of values set in Price option (see page 16).
symbol and its contents,
expressed in the user’s currency, is displayed alternately.
The changes of the counter’s contents are saved
automatically in the long term memory at the beginning
of the session.
START
START
STOP
STOP
MENU
START
START
STOP
STOP
MENU
I.D.E. Systemy Elektroniczne 13
P
P
START
START
P
STOP
I.D.E. e1.01 sunbed controller
EN
PageVersion 1.1 07/2005
P
P
START
START
P
STOP
Part II Operating manual
2. Programming mode