Ventilation
Option is used to set fans operating time after the session.
Range of setting: < 00.00 ; 20.00 > (min)
Default setting: 01.00
Step: 10 sec
ventilation time, set in the controller’s menu,
should be identical with the ventilation time, set inside
sunbed.
To browse and/or change ventilation time:
1. When the controller is in the programming mode (see page 5), in the
Programming options submenu (see page 14), select Ventilation
option with buttons.
2. To change the setting, press button. V time
.
3. Set new value with buttons.
4. To save new setting in the temporary memory, press or
buttons.
To return to the Programming options submenu, press button. To
leave the programming mode and save new setting in the long term
memory, press button or wait 60 seconds.
Price
Range of setting: < 00.00 ; 99.90 >
Default setting: 00.00
Step: 00.10
To browse and/or change price setting:
1. When the controller is in the programming mode (see page 5), in the
Programming options submenu (see page 14), select Price option
with buttons.
2. To change the setting, press button. Price setting
.
3. Set new value with buttons.
4. To save new setting in the temporary memory, press or
buttons.
To return to the Programming options submenu, press button. To
leave the programming mode and save new setting in the long term
memory, press button or wait 60 seconds.
If the sunbed is equipped with the system of automatic
ventilation,
The ventilation symbol and the
ventilation time is displayed alternately.
entilation will be
displayed
Option is used to set the price for one minute of session, according to
which the controller will calculate the takings total counter contents
(see page 13).
The price symbol and the price setting is
displayed alternately.
will be
displayed
and
and
and
and
START
START STOP
STOP
MENU
START
START STOP
STOP
MENU
I.D.E. Systemy Elektroniczne 16
P
START
STARTSTOP
START
STOP
P
PageVersion 1.1 07/2005
I.D.E. e1.01 sunbed controller
EN
P
START
STARTSTOP
START
STOP
P
Part II Operating manual
2. Programming mode
To Next Page
Loading...