IDE e1.01 - External Stop; Stop Lamps

I.D.E. Systemy Elektroniczne 19
2. To change the setting, press button.
To return to the Programming options submenu, press button. To
leave the programming mode and save new setting in the long term
memory, press button or wait 60 seconds.
Stop lamps
Range of setting: no - option deactivated;
yes - option activated
Default setting: no
To browse and/or change stop lamps setting:
1. When the controller is in the programming mode (see page 5), in the
Programming options submenu (see page 14), select Stop lamps
option with buttons.
2. To change the setting, press button.
To return to the Programming options submenu, press button. To
leave the programming mode and save new setting in the long term
memory, press button or wait 60 seconds.
External stop
Range of setting: no - option deactivated;
yes - option activated
Default setting: yes
During the session, tanning symbol is displayed. If
External stop option is activated, and the lamps are
turned off with button in the sunbed, the session
symbol will start blinking - the controller keeps counting
down the session time.
To browse and/or change external stop setting:
1. When the controller is in the programming mode (see page 5), in the
Programming options submenu (see page 14), select External stop
option with buttons. external stop
external stop
2. To change the setting, press button. external stop
external stop
The stop fans symbol and
the stop fans new setting is displayed alternately.
Activating Stop lamps option allows to turn off the lamps during the
session with button in the controller (end of session).
The stop lamps symbol and the stop
lamps setting is displayed alternately.
The stop lamps symbol and
the stop lamps new setting is displayed alternately.
Activating External stop option allows to turn off the lamps for a while
during the session with button in the sunbed and restart them
with button.
The symbol and the
setting is displayed alternately.
The symbol
and the new setting is displayed alternately.
and
and
START
STOP
MENU
STOP
START
STOP
MENU
STOP
START
STOP
START
P
START
P
P
START
PageVersion 1.1 07/2005
I.D.E. e1.01 sunbed controller
EN
P
P
START
Part II Operating manual
2. Programming mode