Need help?Do you have a question about the IDEC HS5L Series and is the answer not in the manual?
General| Protection Rating | IP67 |
|---|---|
| Rated Voltage | 250 VAC, 30 VDC |
| Operating Temperature | -25°C to 70°C |
| Standards | UL |
| Housing Material | Plastic or Metal (Die-cast aluminum) |
Switches with fewer contacts than needed reduce complexity and waste.
Introduce safe machines complying with international standards for competitive advantage.
Ideal for machines that do not shut down immediately or maintain high temperatures.
13% smaller than conventional models, reducing installation space and increasing flexibility.
Achieves high locking strength comparable to conventional models.
Allows unlocking from inside hazardous areas, complying with ISO14119.
Offer excellent vibration resistance, preventing wire loosening without extra tightening.
Solenoid energy consumption reduced by 25% from conventional models.
Detects head removal to ensure switch integrity and safety.
Actuators selected based on door shapes, usage, and installation site for flexibility.
Patented actuator locks doors safely, tolerating up to 16mm bounce space.
Automatically locks actuator without power; manual unlocking available.
Locks when energized, unlocks when de-energized; flexible locking function.
Covers applicable standards, ratings, operating conditions, and mechanical durability.
Details marking requirements for lock monitoring according to ISO14119.
Defines circuit codes (XD, XF, XG, XH) and their contact arrangements.
Illustrates operational states (Status 1-4) for spring lock models with circuit examples.
Shows operational states (Status 1-4) for solenoid lock models with circuit examples.
Provides reference for actuator entry and contact status based on position.
Explains automatic locking and manual unlocking for spring lock models.
Describes locking/unlocking based on solenoid power for solenoid lock models.
Lists applicable standards, ratings, and durability for 4-contact models.
Details circuit codes (VA, VB, VC, VD, VF, VG) and their contact arrangements.
Shows circuit configurations for models with rear unlocking button functionality.
Details circuit configurations for dual safety circuit models.
Combines dual safety circuit and rear unlocking button features.
Illustrates operation states and circuit diagrams for rear unlocking button models.
Shows actuator entry position and contact status for various 4-contact spring lock circuits.
Details circuit codes (VA7Y to VG7Y) and their contact arrangements for solenoid lock.
Illustrates operational states for solenoid lock models with circuit examples.
Shows circuit diagrams and operation states for dual safety circuit models.
Illustrates circuit diagrams for models combining dual safety and rear unlocking.
Lists available actuators (Straight, Right-angle, etc.) with part numbers and retention forces.
Details accessories like sliding actuators, spring loaded actuators, and jumpers.
Provides dimensional drawings and mounting hole layouts for straight and right-angle actuators.
Shows dimensions and mounting for angle adjustable vertical/horizontal actuators.
Explains how to change actuator swing orientation using the orienting insert.
Provides dimensions and mounting hole layouts for the spring loaded actuator.
Shows dimensions and mounting hole layouts for HS5L switches with indicator.
Details part numbers and panel thickness compatibility for rear unlocking button kits.
Covers electrical safety, risk assessment, PLC usage, and solenoid lock considerations.
Provides guidance on door stops, shock prevention, actuator slot plugging, and storage.
Illustrates recommended mounting of interlock switch and actuator on doors.
Specifies minimum door radius for different actuators on hinged doors.
Details how to adjust actuator angle for proper insertion and locking.
Differentiates HS5L metallic heads from HS5D plastic heads for correct usage.
Instructions for rotating the interlock switch head for different orientations.
Explains function availability and limitations for spring lock models.
Guidelines for using HS9Z-BA5 actuator, avoiding misuse as door lock/stop.
Step-by-step guide for adjusting actuator position for optimal locking.
Explains manual unlocking for spring lock switches for pre-checking and emergency use.
Describes manual unlocking for solenoid lock switches in emergency cases.
Instructions for installing the rear unlocking button and kit for manual override.
Lists recommended torque values for various switch and actuator components.
Provides wiring diagrams and important considerations for connecting wires and using ferrules.
Details cable gland compatibility for IP67 protection and different cable types.
Step-by-step guide for connecting wires using the spring clamp terminal.
Instructions for wiring connectors, including cover removal and tightening order.
Guide for installing a jumper to connect monitor circuits for safety input.
To Next Page
