EasyManua.ls Logo

Idex Class 1 ITL 40 - 4 Password List

Idex Class 1 ITL 40
28 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
FORM-ENG-0018 REV A 05-27-03
607 NW 27th Ave
Ocala, FL 34475
Ph: 352-629-5020 or 1-800-533-3569
Fax : 352-629-2902 or 1-800-520-3473
S U I T A B L E F O R E X T E R N A L D I S T R I B U T I O N
OPERATION MANUAL
PAGE
16 of 27
DATE
6/12/2019
PRODUCT GROUP
ITL40
P/N
REV
1.30
PRODUCT
Intelli-Tank Level 40
BY
AMS
MANUAL P/N:118253 PRINTED: 6/12/19
4. Password list
RLLR LRRL
1 point calibration (section 3.3.1)
RLLR LLRL
2 point calibration, empty then full (section 3.3.2)
RLLR LRRR
2 point calibration, full then empty (section 3.3.4)
RLLR LRLR
5 point calibration (section 3.3.4)
RLLR RLLR
9 point calibration (section 3.3.5)
RLLR LLRR
Self test (section 3.4)
LRLR LRLR
Configure display as Remote display (section 2.3)
RLLR LLLR
Configure dim level (section 3.5)
LLRR LLRR
Display voltage (section 7.2)
LRLL LLLR
Configure for 1-wire communications (section 3.7)
LRLL LLRL
Configure for CAN communications (section 3.7)
LRRR LLLL
Configure as Master display with CAN address 1 (section 3.7.3)
LRRR LLLR
Configure as Master display with CAN address 2 (section 3.7.3)
LRRR LRRR
Configure as Master display with CAN address 3 (section 3.7.3)
LRRR RLLR
Configure as Master display with CAN address 4 (section 3.7.3)
LRRR LRLR
Configure as Master display with CAN address PCM (section 3.7.3)
LRRR LLRL
Configure as Remote display with CAN address 1 (section 3.7.4)
LRRR LLRR
Configure as Remote display with CAN address 2 (section 3.7.4)
LRRR LRRL
Configure as Remote display with CAN address 3 (section 3.7.4)
LRRR RLLL
Configure as Remote display with CAN address 4 (section 3.7.4)
LRRR LRLL
Configure as Remote display for use with Pump Sensor Module, Tank 1
(section 3.7.4)
LRRR RLRL
Configure as Remote display for use with Pump Sensor Module, Tank 2
(section 3.7.4)
LRRR RLRR
Configure as Remote display for use with Pump Sensor Module, Tank 3
(section 3.7.4)
LRRL LRRL
Slosh dampening feature enabled (section 3.10)
LRRL LRRR
Slosh dampening feature disabled (section 3.10)
LLRR LLLL
Reference mark turned OFF (section 3.9)
LLRR RRRR
Reference mark turned ON (section 3.9)
LLRR LRRL
Load defaults (remote, 1-wire, dim level 3, “CLASS 1” scroll, slosh dampening OFF)
LLLL LRLR
LLLL LRRL
LLLL LRRR
Configure custom start-up text scroll (section 3.8)
Turn off start-up text scroll
Turn on start-up text scroll (default)

Table of Contents