CardioPet* App for Android Mobile Device 23
Installing the CardioPet app and establishing a Bluetooth
connection
Preparing the tablet
1. On the tablet, go to the device settings (usually accessed by tapping ).
2. Verify that Wi-Fi is enabled and connected.
3. Update the screen timeout to 30 minutes (or your preferred time, but more than 1 minute).
4. Confirm that the date, time, and time zone are set accurately for your location.
5. Verify that the Bluetooth* connection is turned on.
Installing the CardioPet app
1. Tap the Google Play icon.
2. Search for IDEXX CardioPet, and then choose Install.
3. Agree to the Terms of Service and Privacy Policy.
4. Open the CardioPet app when the installation is complete.
Pairing the CardioPet ECG Device and configuring settings
IMPORTANT: Only one instance of the software or app can be used at a time; close all other open
CardioPet applications including the CardioPet software on a Windows* PC.
To pair the CardioPet* ECG Device with the CardioPet app:
1. Turn on the Android tablet and tap to start the CardioPet App.
2. Turn on the CardioPet device.
3. Tap Settings at the top left side of the CardioPet app.
4. Tap in each of the following fields, and then update the information as needed:
Telemedicine
a. VMS User Name and VMS Password: Enter your practice’s VetMedStat* account information. The
account name is three letters followed by four numbers. The password is case sensitive.
b. VMS URL: api.vetmedstat.com (leave as is; do not change)
Note: Red check marks turn green when the Android device is connected to the internet and the
VMS user name and password are entered correctly. For assistance, email
teledmedicinesupport@idexx.com or call 1-800-726-1212.
To Next Page
Loading...
Need help?
General
