To Next Page

To Previous Page

IDS1600 USER MANUAL NO. 700-146-01D ISSUED NOV 2002 VER 2.17 13

IDS1600 USER MANUAL

siyaledyrtnEyramirP6noititraPehT.sdnoces

siyaledyrtnEyradnoceS6noititraPehTsdnoces

siyaleDtixE6noititraPehT.sdnoces

siyaledyrtnEyramirP7noititraPehT.sdnoces

siyaledyrtnEyradnoceS7noititraPehTsdnoces

siyaleDtixE7noititraPehT.sdnoces

siyaledyrtnEyramirP8noititraPehT.sdnoces

siyaledyrtnEyradnoceS8noititraPehTsdnoces

siyaleDtixE8noititraPehT.sdnoces

5. Arming the System

There are various options for arming the system

5.1 Away Arming Procedure

[#] + [USER CODE]

(Leave via Entry Exit Zone)

1. Ensure that the READY indicator is illuminated; if not, check

that all protected doors and windows are closed and that motion

has ceased in areas covered by motion detectors.

0 1 / 0 1 / 9 9 0 : 0 4

R E A D Y MO N

MRA ELBUORT

 

2. If necessary, close the front door.

3. Press the [#] key to cancel any unintended key entries.

4. Enter a valid 4 digit [USER CODE]. If you make a mistake, press

the [#] key and re-enter the code.

5. The ARMED indicator will flash for the duration of the exit delay.

Any bypassed zones will be shown by a steady illuminated zone

indicator.

Questions and Answers:

Need help?

Do you have a question about the IDS IDS1600 and is the answer not in the manual?

IDS IDS1600 Specifications

General