IDS IDS1600 - Page 29

IDS1600 USER MANUAL NO. 700-146-01D ISSUED NOV 2002 VER 2.17 29
IDS1600 USER MANUAL
3. The relevant zone indicator will illuminate. (Buzz zones will be
shown by flashing indicators. See Section 13. A Buzz zone
cannot be selected as a Stay zone; the Buzz status must be
cleared first.)
4. Repeat step 2 until all stay zones are selected.
5. Press the [#] key to exit the stay zone programming mode.
12.1.1To Program Stay Zones - LCD Keypad
1. Hold down the [3] key until the keypad buzzer sounds.
S T A Y Z O N E MO D E
MRA ELBUORT
 
2. Press the [MODE/ menu >] key.
Z O N E 1

F O R S T A Y Z O N E
MRA ELBUORT
 
3. Use the [MODE/ menu >] and [Fire/ < menu] keys to scroll to
the zone you wish to be a stay zone e.g. zone 3.
Z O N E 3

F O R S T A Y Z O N E
MRA ELBUORT
 
4. Press the [] key to make the zone a stay zone.
Z O N E 3

T O D E S E L E C T
MRA ELBUORT
 
5. Repeat steps 3 and 4 until stay zones are selected.