42 IDS1600 USER MANUAL NO. 700-146-01D ISSUED NOV 2002 VER 2.17
IDS1600 USER MANUAL
nominated zone is violated - the siren will NOT sound and no alarm
condition will be reported. See page 35 for instructions on
programming chime zones.
15.4.2Stay Zones
Shortcut key - [3]
Stay zones are those zones which are bypassed automatically when
the system is STAY ARMED. To avoid triggering the alarm, zones
such as bedrooms, or other areas which require access, must be
bypassed. Stay zones need only be programmed once. Each time the
system is armed in the stay mode the pre selected stay zones will be
bypassed automatically. See page 27 for instructions on how to
program stay zones.
15.4.3Buzz Zones
Shortcut key - [4]
Buzz zones are used when stay arming. When triggered, buzz zones
will cause the keypad buzzer to sound for a period of 30 seconds
during which time a valid user code must be entered. If a valid user
code is not entered during this period the system will register an alarm
condition. It is advisable to program Buzz zones if you are likely to
accidentally trigger these zones or if you have pets. This feature helps
prevent unnecessary false alarms. See page 31 for instructions on how
to program buzz zones.
15.4.4Bypass Zones
Shortcut key - [9]
The term BYPASS is used to describe a zone that has been
deactivated; i.e. violation of a bypassed zone will not cause an alarm.
It is used when access is needed to part of the protected area while
the system is armed. Zones cannot be bypassed once the system is
armed and bypassed zones are automatically cancelled each time the
system is disarmed and must be re-bypassed before the next arming.
See page 16 for instructions on how to bypass zones.
15.4.5Zone Names
This option is used for description purposes i.e. instead of showing a
zone 3 violation, “zone 3” would be repaced by the description
programmed here, eg. “kitchen”.
To Next Page
Loading...
Need help?
General
