10
Selecting Your Desired Temperature (adjusting the setpoints)
Heat or Cool Mode
Pressing the UP or DOWN buttons in
HEAT or COOL mode will adjust only
the heat or cool set temperature.
Using the FAN Button
Pressing the FAN button will run the fan in low, medium, or high speed
continuously.
If the FAN is not on the display, then the fan is in AUTO mode and will
run only when necessary to heat or cool.
NOTE: If the thermostat is placed in the OFF mode, the fan will de-energize.
Auto-Changeover Mode
Pressing the UP or DOWN buttons in
AUTO mode will adjust both the heat
and cool setpoints simultaneously.
To adjust the heat and cool setpoints
individually, choose HEAT mode to
adjust the heat setpoint, and COOL
mode to adjust the cool setpoint, then
return to AUTO mode.
Adjust the desired
set temperature
with these buttons
Basic Operation
To Next Page
Loading...
Need help?
General
