19
Installer Setup
Control to Sensor (setup step 21)
Select LOCAL to control the thermostat
temperature with the internal sensor.
Select REMOTE to control the temperature
with a remote sensor connected to the RS & R
terminals of the thermostat backplate.
Pre-Occupancy
Fan Purge (setup step 22)
When this feature is activated, the fan will turn
on during an unoccupied period at a preset
amount of time prior to Occupied 1. This
preoccupancy fan purge timer may be set from
zero to three hours, in 15 minute increments.
Zero (0) means this feature is turned off.
To Next Page
Loading...
Need help?
General
