4 - HANDLING AND INSTALLATION KID 70
GB
4 - Pag. 19 / 21
4.8.4 Bar feeder fastening
INFORMATION:
considering that this
operation is fundamental
to assure in time the bar
feeder stability and the
WARRANTY VALIDITY, the
person who is authorised
to carry it out, will have to
take extreme care of it.
For the fastening proceed as
follows:
- Put the two remaining plates (A)
under the frame and fasten them
with socket head screws (B).
- Drill the floor in the direction of
the frame holes.
- Fasten the frame with the
expansion plugs.
- Reinstall the two guide sections
after making sure that
alignment, levelling and
fastening are carried out
correctly.
To Next Page