6.3 RESTORING THE PRINTER TO OPERATIONAL CONDITION
FOLLOWING PERIODIC MAINTENANCE
6.3.1 Actions to be Performed Before Putting the Printer
Into Service
After performing periodic maintenance operations:
- Close / Lock the printhead assembly, see page 40.
- Close the printer cover.
- Connect the data cable and the power cord, see page 15.
- Switch the printer on, see page 20.
- Load paper into the printer, see page 29.
- Print a document to check the print quality, see page 32.
IER 400B
User Guide
Page 50
N0C402B Rev. 1
July 6, 2009
Ce document est la propiété d'IER et ne doit pas être reproduit ou communiqué sans autorisation écrite.
This document is the property of IER and may not be reproduced or communicated without prior written authorization
To Previous Page
Loading...
