1.2 PRESENTATION OF THE PRINTER
The IER 400B Printer is designed to print bag tags, ATB1 size coupons
and flight strips.
With a standard print resolution of 203 dpi (8 dots/mm), the IER 400B
Printer provides high quality print for text, logos and barcodes.
In its 107mm printhead version (80mm on the standard version), the
IER 400B Printer can print documents up to 120mm in width.
The printer can also be fitted with two different types of front panel:
a front panel with a display and a 4-key control panel,
a front panel with no display and a 2-key control panel.
The IER 400B Printer uses direct thermal printing technology, which
requires heat-sensitive paper media.
Blank bag tags or boarding pass strips are fed continuously through the
rear of the printer. The printer accepts fanfold media or roll media, if fitted
with the IER roll media dispenser option.
The printer is equipped as standard with an output slot with two serrated
edges for tearing off printed documents.
Optionally, the printer can feature an automatic document separator
system,
of the cutter type for applications requiring documents of varying lengths.
For applications offering RFID (Radio Frequency Identification)-enabled
baggage handling, the IER 400B Printer, if equipped with the optional RFID
module, is also able to print and encode bag tags containing a radio
frequency antenna.
IER 400B
User Guide
Ce document est la propiété d'IER et ne doit pas être reproduit ou communiqué sans autorisation écrite.
This document is the property of IER and may not be reproduced or communicated without prior written authorization
Page 9
N0C402B Rev. 1
July 6, 2009
To Next Page
Loading...
