Ier 400B - Page 7

4. PRINTER OPERATION............................................
30
4.1 INDICATOR AND KEY FUNCTIONS ......................................
30
4.1.1 MEANING OF PRINTER INDICATOR BEHAVIOR ......................... 30
4.1.2 CONTROL PANEL KEY FUNCTIONS......................................... 31
4.2 PRINTING DOCUMENTS......................................................
32
4.2.1 DOCUMENT PRINTING PROCEDURE ........................................ 32
5. USER LEVEL TROUBLESHOOTING......................
34
5.1 OPERATING FAULTS ........................................................
34
5.1.1 WHEN POWERING UP, THE PRINTER DOES NOT START UP........ 34
5.1.2 THE PRINTER DOES NOT RECEIVE PRINT DATA........................ 34
5.1.3 THE PAPER IS NOT FEEDING................................................... 35
5.1.4 POOR PRINT QUALITY............................................................ 35
5.1.5 FREQUENT ERROR SIGNALS ................................................. 36
5.2 OPENING THE PRINTHEAD ASSEMBLY - CLEARING A
DOCUMENT JAM...............................................................
38
5.2.1 PROCEDURE ........................................................................ 38
5.3 CLOSING AND LOCKING THE PRINTHEAD ASSEMBLY..........
40
5.3.1 PROCEDURE ........................................................................ 40
5.4 UNLOADING THE MEDIA....................................................
42
5.4.1 AUTOMATIC REMOVAL........................................................... 42
5.4.2 MANUAL REMOVAL ............................................................... 43
6. PRINTER MAINTENANCE.......................................
45
6.1 RECOMMENDED PERIODIC MAINTENANCE .........................
45
6.1.1 PERIODIC MAINTENANCE FREQUENCY..................................... 45
6.2 PERIODIC MAINTENANCE PROCEDURES.............................
46
6.2.1 REMOVING DUST FROM THE PRINTER MECHANISM ................ 46
6.2.2 CLEANING THE PRINTHEAD AND PLATEN................................ 48
6.3 RESTORING THE PRINTER TO OPERATIONAL CONDITION
FOLLOWING PERIODIC MAINTENANCE................................
50
6.3.1 ACTIONS TO BE PERFORMED BEFORE PUTTING THE PRINTER
INTO SERVICE ...................................................................... 50
IER 400B
User Guide
Ce document est la propiété d'IER et ne doit pas être reproduit ou communiqué sans autorisation écrite.
This document is the property of IER and may not be reproduced or communicated without prior written authorization
Page 7
N0C402B Rev. 1
July 6, 2009