IFM AL1940 - Firmware: Reset Device to Factory Settings; Firmware: Reboot the Device

33
ifm Device Manual IO-Link Master with Modbus interface CabinetLine 8 Ports IP 20 (AL1940) 05 / 2018
Configuration LR DEVICE
>
8.1.11 Firmware: Reset device to factory settings
7209
When the IO-Link master is reset, all parameters are set to the factory settings:
To reset the device to factory settings:
► Select [Firmware] menu.
> The menu page shows the current settings.
► Click on [Factory Reset] to reset the device.
> LR DEVICE sets the device to the factory settings.
>
8.1.12 Firmware: Reboot the device
18105
When rebooting the device, all settings are kept.
To restart the AL1940:
► Select [Firmware] menu.
> The menu page shows the current settings.
► Click on [Reboot] to reboot the device.
> LR DEVICE reboots the ifm IO-Link master.