IFM AL1940 - Page 64

64
ifm Device Manual IO-Link Master with Modbus interface CabinetLine 8 Ports IP 20 (AL1940) 05 / 2018
Factory settings Replace IO-Link device
11 Factory settings
16542
In the factory settings, the device has the following parameter settings:
Parameter
Factory setting
[IP address] (Modbus)
192.168.1.250
[Subnet mask] (Modbus)
255.255.255.0
[IP gateway address] (Modbus)
0.0.0.0
[IP address] (IoT interface)
169.254.X.X
[Subnet mask] (IoT interface)
255.255.0.0
[IP gateway address] (IoT interface)
0.0.0.0
[Modbus name]
blank
Data memory (Data Storage)
blank