IFM SU2020 - Optical Localisation

Ultrasonic flow meter SU2020 SU8020 SU2021 SU8021 SU2621 SU8621
51
10.7.1.2 Reading or parameter setting via IO-Link: device information
u Select [Identification].
u Read device information or edit editable parameters.
10.7.2 Optical localisation
The sensor can be located remotely in the system via the IO-Link interface.
When the command is used, the switching status LEDs will flash and  IO-Link will flash on the
display.
10.7.2.1 Parameter setting via IO-Link: optical localisation
u Select [Identification].
u Execute command: [Flash On].
u To end the flashing process: Execute command: [Flash Off].